What is Inconel 625 pipe fittings?
A fittings which is made stiffer by adding niobium contents to the high level of nickel and chromium in the chemical mixture is alloy 625 fittings. This pipe fitting is also classified as superalloy.
As a result, since Inconel 625 fittings are addressed and considered as superalloys, they can withstand extreme temperature scenarios; without losing any mechanical strength. They also exhibit good resistance to crevice corrosions and pitting.
Alloy 625 elbow manufacturer in India
In India, where can I find Alloy 625 elbow manufacturer?
If you need good quality assured alloy 625 elbow, we at K.K. Industries warmly welcome you where we are experienced enough to provide you reasonable prices quoted for your needs and standards to be fulfilled.
For a long time, until today, we are the leading, reputed and well known Inconel 625 pipe fittings manufacturers in India, where we also provide assurance of quality and product genuineness. This is achieved by providing test certificate to an end user.
Custom elbow sizes are also available, if you require specific needs and standards to be cleared.
Our Inconel 625 reducing tee and Nickel 625 reducer are not only high-quality, but also cost-effective
Inconel 625 pipe fittings
Alloy 625 elbow
Nickel 625 reducer
What size ranges are available for Inconel 625 pipe fittings?
With respect to size, you have wide range of choice to meet your specific demand and standard as Inconel 625 seamless fittings come in size range of 1/2’’ NB – 24’’ NB.
Table of Content
Purchase NCF 625 end cap and Inconel Alloy 625 tee in wide range of sizes and dimensions
Nickel 625 Buttweld Fittings distributor and offer proper stamping & marking for DIN 2.4856 Eccentric Reducer
Inconel 625 stub end
- Long / Short / Lap Joint
NCF 625 cap
- Schedule 80
- Schedule 120
- Schedule 160
Alloy 625 buttweld fittings
- Sch 10
- Sch 40
DIN 2.4856 elbow
- 45 degree
- 90 degree
- 180 degree
Inconel 625 tee
- 1/8” NB TO 48” NB
Nickel 625 reducer
Inconel 625 fittings and 45/90 degree elbow are mostly used in extremely high resistance to corrosion
What are the mechanical properties which are shown by the Inconel 625 long radius elbow?
You would observe Inconel 625 long radius elbow exhibiting good mechanical properties across the wide range of applications.
They inherit 24600F melting point, have a tensile strength value being 1,35,000 Psi, their yield strength being 75000 Psi. The density of this material is 8.4 g/cm3.
What are the different types of Inconel pipe fittings of the grade 625?
You would see different types of Inconel pipe fittings of the grade 625, which are demanded by industries uniquely in order to meet their needs and standards. Below are some of them:
- We use nickel 625 reducer in industries where we need excellent strength characteristics and resistance to corrosions in aqueous environments.
- On the other hand, nickel 625 buttweld fittings are utilize for the fitting component manufacturing process, which are then utilized in plant equipment.
- Another useful flange type is the Inconel alloy 625 tee
- NCF 625 end cap in marine applications, pollution-control based scenarios and aerospace, thanks to its excellent corrosion resisting characteristics.
- Corrosion resistance properties are also exhibited by DIN 2.4856 eccentric reducer to pitting and crevice.
For exploring many other types of the pipe fittings of grade 625 and understanding each characteristic properties that are delivered, you can check out our website for the same.
What is the corrosion resistance behaviour of Inconel 625 45/90 degree pipe elbow fittings?
You would see wide range of application by utilizing Inconel 625 450 elbow, thanks to the high level nickel, chromium and molybdenum contents which help in offering good resistance to general corrosive environments.
Adding to this, Inconel 625 900 elbow, also resist pitting and crevice corrosions, along with providing appreciable corrosion resistance in seawater.